This Anti Slip Coating provides a slip-resistant surface to bathtub bottoms, shower bases, tile or concrete floors. Designed for applications where a patch area or a defined non-slip/anti-slip surface area is required to save completely refinishing the entire surface. Obviously, no surface treatment can totally prevent falls. However, this will help keep your employees and loved ones safe on all of these surfaces. Our Anti-Slip Coatings will increase friction and reduce the likelihood of a fall. The components include either a clear coat or a color-matched coating with a semi-transparent powder added to provide a textured surface. The Quick Glaze system provides a great textured surface for porcelain, cast iron, gelcoat and acrylic bath products as well as tile, concrete or metal surface. If the following procedure is followed, it will have great adhesion to the existing surface. The final surface appearance should have a consistent textured surface as shown in the picture.
Materials and Equipment:
|The photos and instructions displayed below will show you exactly how simple it is to do your own repairs in just 5 easy steps. For additional instructions click here. Also, we recommend purchasing our accesories by clicking on the products listed below.|
Showing reviews 1-10 of 12 | Next
Posted by n gaines on 8th Apr 2017
I used this DIY kit to refinish a shower after a structural repair and it worked great nice surface texture from the medium grit and everything I needed without not a lot of waste. I will be recommending your products
Posted by Unknown on 22nd Feb 2017
?? Slow Shipping
NOTE FROM: Surface Repair.Com
Dear un-named review... We checked in our system. There has not been any misrouted or shipment mishaps on any recent Non-Slip kits. Our product ships promptly as tracking numbers are included. Although our customer service has not received a phone call or an email about your case. Please contact our customer service as soon as possible to resolve any issues or confusion. 800-218-2066 We will be happy to help you.
Posted by ron Ingram on 25th Jul 2016
My wife slipped and broke her tail bone in our cast iron porcelain coated tub. I knew it was slippery and we had tried bath mats but ended up throwing them out because they quickly became nasty. I researched many products on line and settled on the bathtub and shower texture coating. I was nervous at first but followed the instructions to the tee. My only mistake was not using the thinner initially and poured half the mixture on the tub and realized it was too thick to spread evenly. I mixed some of the thinner with the remaining half and poured it on the tub surface. It spread out evenly and looks great. Most importantly, it is perfectly textured. My wife is now comfortable getting back in the shower.
NOTE FROM Surface-Repair.com
Although textured applications can increase surface grip significantly. Other things can increase the chance of a fall. Beware of hair and body products that make the surface slick, even with texture. For example, hair conditioner and certain soaps can diminish the grip of the original surface without texture. Consider avoiding those toiletry products that make critical surfaces slick.
Posted by Peter Beestrum on 23rd Jun 2016
Bought the K1000 kit and was very pleased with the results. Followed the taping procedure and mixed the "goop" and all went well. Would have given 5 stars but the mixing directions for the hardener were a little smeared. I ended up just dumping the hardener into the coating and going from there.
Posted by Joe Llanes on 21st Jan 2016
This product has great durability and was very satisfied with the outcome. The reducer bottle that it comes with is optional to use. Make sure to prep with with 220 grit, and when pulling up tape it may pull up the edges a little so i went back over the edges with a little paint brush to seal the edges, worked great. I also had a lot of spider cracks and started to get chips. The crack and filler polyester filler worked awesome and is easy to sand. If you have any questions speak to Rick and he was very helpful .
Posted by Greg on 11th Dec 2015
The individual containers of product have quantities on the labels.(looks as there is way more anti-slip powder than req'd for accurate proportion mixing of 32-1) Guess they want you to have more for adjusting??? There should be an estimated time frame for masking removal without damage to the product edge lines.
Note from Surface-Repair.com:
K2000 and Quick Glaze applications, allow to dry for at least 20 minutes before removing tape. Tape will come off smooth when product does not overlap the tape heavy or over-loaded. Tape can come off anytime up to 24 hours. In the event of flooded or overloaded product, or If longer periods have passed, cut or follow the tape line with a knife or razor. Tape will peel off smooth.
Posted by Louis Fishman on 3rd Nov 2015
EXCELLENT PRODUCT. Works exactly as advertised. Our tub was extremely slippery : now it is safe again. This repair kit is easy to use and provides the installer with everything needed. Thank you.
Posted by Satisfied on 21st Jun 2015
I called the support line since I was not sure what color to choose. They told me that the plumbing white is a safe choice. It did came out more gray than with the bathtub white. Should have chosen the white. Really nice finish, wish I would have chosen whiter color. There is a difference but it looks uniform. Can live with it.
Note from Surface-Repair.com: Most Bath ware White is more gray. The lighter colors are usually gel coat. If you sand the surface near the damaged area with 300 grit sandpaper, you will smell a sweet odor like fiberglass on the sandpaper. If this is the case the light color usually would be better. No odor, get plumbing white as a general rule. Another way is If the color is close to printer paper white or lighter than paper, order the pure white. Darker than printer paper white, order the plumbing (grayer white).
Posted by Unknown on 21st Jun 2015
Was easy to use. Instructions incorporated the enamel and plastic instruction on the same brochure. That helped.
Quantities supplied match mixing instructions, the hardener quantity of the K1000 supplied was 1/5 as suggested in the instructions but worked well. I would suggest supplying the vinyl contour line with the kit, i know those are expensive like 12 bucks, it is natural for it to be part of the kit though, same for suggesting a mixing cup. Result looks very neat and professional. Am pleased. I did all the prep as suggested, now to be seen how will it hold with use.
Posted by Unknown on 5th May 2015
Looks great, easy to mix and use. Acid paste did a good job.
Showing reviews 1-10 of 12 | Next