Loading... Please wait...

Bath Tub Shower Anti Slip Coating

  • Bath Tub and Shower Non-Slip / Non-Skid Application Kit for Acrylic, Gelcoat, Porcelain, Cast Iron, Tile and Fiberglass, slip resistant treatment
  • Non-Slip Kit Acrylic, Treatment for Gelcoat, Porcelain, Cast Iron, Tile and Fiberglass
  • Detail Tape Non-Slip Kit Acrylic, Gelcoat, Porcelain, Cast Iron, Tile and other Fiberglass
  • Prep Area Non-Slip Kit Acrylic, Gelcoat, Porcelain, Cast Iron, Tile and other Fiberglass
  • Etch for Porcelain and Tile Non-Slip Kit Acrylic, Gelcoat, Porcelain, Cast Iron, Tile and other Fiberglass
  • Etch Application Non-Slip Kit Acrylic, Gelcoat, Porcelain, Cast Iron, Tile and other Fiberglass
  • Apply Product Non-Slip Kit Acrylic, Gelcoat, Porcelain, Cast Iron, Tile and other Fiberglass
  • Remove Tape Non-Slip Kit Acrylic, Gelcoat, Porcelain, Cast Iron, Tile and other Fiberglass
  • Taped Area Non-Slip Kit Acrylic, Gelcoat, Porcelain, Cast Iron, Tile and other Fiberglass
  • Final Finish Non-Slip Kit Acrylic, Gelcoat, Porcelain, Cast Iron, Tile and other Fiberglass
Price:
$79.95
SKU:
REFKTAB-SP
Availability:
Ships for Flat Rate of $4.95 within Continental U.S. (Please allow 3 - 5 business day lead-time)
Shipping:
Calculated at checkout
Quantity:


Product Description

Anti Slip Coating provides a slip-resistant surface to bathtub bottoms, shower bases, tile or concrete floors. Designed for applications where a patch area or a defined non-slip/anti-slip surface area is required to save completely refinishing the entire surface. Obviously, no surface treatment can totally prevent falls. However, this will help keep your employees and loved ones safe on all of these surfaces.  Our Anti-Slip Coatings will increase friction and reduce the likelihood of a fall. The components include either a clear coat or a color-matched coating with a semi-transparent powder added to provide a textured surface. The Quick Glaze system provides a great textured surface for porcelain, cast iron, gelcoat and acrylic bath products as well as tile, concrete or metal surface.  If the following procedure is followed, it will have great adhesion to the existing surface.  The final surface appearance should have a consistent textured surface as shown in the picture.

Materials and Equipment:

  • Quick Glaze™ Basecoat as a clear-coat or a color matching the original product color
  • Quick Glaze Hardener
  • Texturing Additive or the Pre-Mixed Combination of Basecoat with Texturing Additive 
  • Quick Glaze Reducer if thinning is needed
  • Gelcoat can be used with the Texturing additive for gelcoat/FRP rather than Quick Glaze
  • ¼” Vinyl Contouring Pre-Tape
  • 3” Roller Frame  
  • 3” Premium Enamel Roller Cover, Smooth Nap
  • 1 ½” Premium Refinishing Tape
  • Wet or Dry Sandpaper  (220 or 320 grit)
  • Etching cream for enamel or porcelain surfaces
  • Polyvinyl alcohol (PVA) spray when gelcoat is used as the coating rather than Quick Glaze
  • Heat gun if PVA is used
  • Lacquer Thinner
  • Etching cream – Only anti slip coatings on tiles (porcelain enamel or tile surfaces)
  • Latex Gloves
  • Vapor Particulate Respirator

 

Anti Slip Coatings Application

 

The photos and instructions displayed below will show you exactly how simple it is to do your own repairs in just 5 easy steps. For additional instructions click here. Also, we recommend purchasing our accessories by clicking on the products listed below.
 
Taped Off Area Non-Slip Kit
STEP 1:
Tape off desired area for the non slip coating treatment.
 
 
Prep Area Non-Slip Kit
STEP 2:
Sand surface with 220 or 320 wet sand paper until dull to assure proper adhesion.
 
 
Mix Product Non-Slip Kit
STEP 3:
Mixing Base Coat (Quick Glaze)
  • Shake base well. Mix four (8) parts base to one (1) part hardener.
  • One hour working time; depending on temperature.
Mix Product Non-Slip Kit
Mix Product Non-Slip Kit
 
 
Apply Product Non-Slip Kit
STEP 4:
Apply moderate coat(s) with enamel type paint roller until desired coverage consistency and texture is achieved.
 
 
Remove Tape Non-Slip Kit
STEP 5:
Remove tape and allow 12 to 24 hours to cure. Please see finished product below.
Final Finish Non-Slip Kit
Final Finish Texture Non-Slip Kit
 
 

 

Additional Applications For Anti Slip Coatings

  • Anti Slip Coatings for Tiles - Can be used as a non skid product for porecelin, enamel or tile surfaces.
  • Non Slip Concrete - This product works effectively on concrete floors as well.
  • Non Slip Metal Flooring - Works effectively on metal surfaces for safety.
  • Non Slip Bath - This Anti Slip Coating was designed specifically to work on gelcoat and acryltic bath products.

 IMPORTANT*

! WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Find Similar Products by Category
Write your own product review

Product Reviews

Previous | Showing reviews 11-17 of 17

  1. Just details. Great Product 4 Star Review

    Posted by on 11th Dec 2015

    The individual containers of product have quantities on the labels.(looks as there is way more anti-slip powder than req'd for accurate proportion mixing of 32-1) Guess they want you to have more for adjusting??? There should be an estimated time frame for masking removal without damage to the product edge lines.

    Note from Surface-Repair.com:
    K2000 and Quick Glaze applications, allow to dry for at least 20 minutes before removing tape. Tape will come off smooth when product does not overlap the tape heavy or over-loaded. Tape can come off anytime up to 24 hours. In the event of flooded or overloaded product, or If longer periods have passed, cut or follow the tape line with a knife or razor. Tape will peel off smooth.


  2. Safety accomplished 5 Star Review

    Posted by on 3rd Nov 2015

    EXCELLENT PRODUCT. Works exactly as advertised. Our tub was extremely slippery : now it is safe again. This repair kit is easy to use and provides the installer with everything needed. Thank you.


  3. Color 4 Star Review

    Posted by on 21st Jun 2015

    I called the support line since I was not sure what color to choose. They told me that the plumbing white is a safe choice. It did came out more gray than with the bathtub white. Should have chosen the white. Really nice finish, wish I would have chosen whiter color. There is a difference but it looks uniform. Can live with it.

    Note from Surface-Repair.com: Most Bath ware White is more gray. The lighter colors are usually gel coat. If you sand the surface near the damaged area with 300 grit sandpaper, you will smell a sweet odor like fiberglass on the sandpaper. If this is the case the light color usually would be better. No odor, get plumbing white as a general rule. Another way is If the color is close to printer paper white or lighter than paper, order the pure white. Darker than printer paper white, order the plumbing (grayer white).


  4. Good DIY product 4 Star Review

    Posted by on 21st Jun 2015

    Was easy to use. Instructions incorporated the enamel and plastic instruction on the same brochure. That helped.
    Quantities supplied match mixing instructions, the hardener quantity of the K1000 supplied was 1/5 as suggested in the instructions but worked well. I would suggest supplying the vinyl contour line with the kit, i know those are expensive like 12 bucks, it is natural for it to be part of the kit though, same for suggesting a mixing cup. Result looks very neat and professional. Am pleased. I did all the prep as suggested, now to be seen how will it hold with use.


  5. Went on smoothly 5 Star Review

    Posted by on 5th May 2015

    Looks great, easy to mix and use. Acid paste did a good job.


  6. Adequate Instructions 5 Star Review

    Posted by on 11th Jul 2014

    The tub and shower non-skid kit included the paint, a hardener, a reducer, a roll of tape, and a nice small roller. The color, bone/almond, was a nice match to my American Standard bone fixtures, and the amount sent was adequate to cover the bottom of a standard bathtub. The instructions said to mix either a 5 to 1 or an 8 to 1 ratio of hardener to paint, but we chose to mix at a 5 to 1 ratio. This worked well. The paint rolled well with very smooth roll out, and the working time was what was expected. We removed the tape about 6 hours after painting, and it removed easily. The finish looks good and looks professional. The texture is nearly identical to that of the non-skid strips that this paint replaces. The look is much better than those strips! Note that a respirator is a MUST when using this product. We also used fans to pull the smell out of the bathroom, and it took about an hour or so for the smell to dissipate with the windows open. I would cautiously recommend the product to experienced DIYers or professionals only for you want to be prepared for the odor like other paint products.


  7. Great safety coating 5 Star Review

    Posted by on 10th Dec 2013

    The directions with all the products are very clear and include pictures, very easy to follow. I applied the coating over the fiberglass repair kit that had cured and been sanded. The coating went on smoothly and cured very hard, the color is a great match in the biscuit linen. I am very please. The ugly flexing shower is now firm and stable and looks great.


Previous | Showing reviews 11-17 of 17

You May Also Need . . .

You May Also Need . . .

You Recently Viewed...