Reinforcement repair kit for bath, shower, spa, hot tub and other fiberglass (FRP) structural damage such as boats, power sports, utility covers, automotive and more. Our specially formulated resin will bond to ABS, Plastics and Polyurethane.
Beware: As where most fiberglass resins will initially bond to plastics upon application, those resins will lose adhesion and peel off within a short period of time. This kit is formulated for those applications.
Available in three sizes as follows:
For Technical Information on this product please click here.
Posted by Unknown on 31st Oct 2012
The kits are good products. The only problems I had was getting my order.
I ordered 2 of the medium structal kits, didn't get both of the kits until about 6 weeks after I paid.
First they sent the wrong kit. Then they said they are sending them out. The next day I got one of the kits. I didn't get my other kit until 3 weeks after that one, and that was me trying to explain to them what I ordered and what I got. Had to jump through a lot of hoops just to get me complete order. No fun at all.......
Posted by Gregory Saunders on 3rd Oct 2012
I have a bathtub replacement from Menards. It is now a short shower unit since the tub was removed. All was OK for about a year & a half. I am a big guy, 400lbs. And my wife and son are good size too. My daughter who comes and helps in cleaning, noticed a crack line in the unit a couple of Monty's ago. It kept getting longer, then another showed itself. I did not want to take the base out as the ceramic wound have to come hot also. I came across the "Structural tub repair kit & it looked just what I needed.
I ordered the large kit and read & followed the directions closely. Then I applied the non-slip coating after 24 hours. In a word "Fantastic." The unit used to flex a lot, which I never liked. Now, very solid! Very easy to apply both repair and non-slip. There was plenty of materials to apply all three Coates as instructed. First a small patch, then right away a larger second piece with the resin. Then a third piece of the fiberglass mat saturated with the resin. Smoothed the whole thing and applied another coat of resin. Wow! Sanded it like I had before applying anything ( the hard part ). A few small bubble holes which I filled with more resin. Wiped down everything with a Tac cloth & alcohol. Let dry 24hrs. Structural work done.
Taped up as in instructions with non-slip kit, & applied the non-slip coating with the small paint roller in kit. Pulled up tape and WOW! Fantastic!! Let dry till next morning & all took showers. Everyone surprised how GREAT it turned out.
Good tip: if doing a bath or shower area, keep door closed while sanding!
I will HIGHLY recommend these two kits. FANTASTIC !!