Loading... Please wait...

Refinish Bathtub Shower Fiberglass Porcelain Aerosol Spray

  • Aerosol Refinish Spray Bath Tubs Sinks Shower Base Tile Acrylic Fiber Glass Gel Coat Porcelain Ceramic
  • Bath Ware Aerosol Spray
  • Utility Sink Spray Coating
  • Sink Tub Shower DIY Repaint Aerosol Spray
  • Bathtub spray paint, Bath tub paint, Shower paint, Shower spray paint
Ships for Flat Rate of $4.95 within Continental U.S. (Please allow 3 - 5 business day lead-time)
Calculated at checkout

Product Description

Surface Repair Refinishing Spray is ideal for the toughest refinishing jobs, this porcelain hard refinish coating cures and becomes hard like no other paint and is long lasting, durable, with a high gloss finish that is easily kept maintained. Use for refinishing bathtubs, sinks, toilets, shower stalls, stove tops, washers, dryers, refrigerators, outdoor furniture and more. This product can also be used on cast iron, enameled steel, vitreous china, porcelain, gel-coated fiberglass, acrylic and plastics. This ceramic like product is the ultimate for applications where water moister, high humidity and ease of cleaning are a concern. The applications are endless!

Available colors: (Choose above) Appliance White, Plumbing White, Biscuit/Linen and Almond/Bone.

Other applications:
Utility and golf carts, hand rails and grab bars, air conditioning grills, parts refinishing, metal doors and window frames, cabinet doors, office furniture, file cabinets and more. Great for pool, spa, sauna, utility and pump areas, basement, kitchen, yard and other products exposed to the elements.

Application highlights and recommendations:

  • Sprays smooth with little orange peel and nice gloss.
  • A clear coat is available for surfaces that do not need color or to extend the use of the color coat application.
  • Clean the surface first with pre-cleaner and wipe with a tack cloth for optimum spray out results and a dust free finish.
  • Spraying product at 76 degrees ambient work temperature will give excellent spray out results.
  • Don’t spray where a heater or fan is blowing on the spray area. This will dry the coating before it lays to the surface causing roughness to the finish.
  • Bonds to acrylic, fiber glass, gel coat and plastics with long term adhesion especially when the surface is sanded first with 320 grit sandpaper or with a scotch brite pad.
  • Product is high in solids, will cover generally in two coats. Allow first light coat to become tacky (wait 5 minute) before applying heavier final finish coat.
  • Understand shaking the can for a full minute will assure best coverage and results.
  • Remove the gloss first from enamel, ceramic and porcelain finishes with our etching cream for best adhesion.
  • Mask off the areas that you do not want over-spray or product on like the tile edge fixtures and floor.
  • Wear the recommended respirator when poor ventilation is apparent.
  • Wet coating can be cleaned up with lacquer thinner or Isopropyl alcohol. Be sure to wear protective latex gloves.
  • Longevity and adhesion will be extended by allowing the new coating to cure for 48 before putting back into use in a wet or humid environment.

For Technical Information on this product please click here.


! WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Find Similar Products by Category
Write your own product review

Product Reviews

Previous | Showing reviews 41-43 of 43

  1. Magically Matches any white tub 5 Star Review

    Posted by on 7th Nov 2013

    Been using for a year now on my motel and rent houses and is the best thing I've found to cover worn out porcelain but be sure to remove every sign of rust before using

  2. Recommend Product 5 Star Review

    Posted by on 15th Aug 2012

    I repainted an entire shower in a bathroom with 2 cans and knew there would be some fumes because I have sprayed coatings before on cabinets. A spray like this causes fumes. I got the spray mask and put up a fan to blow the fumes outside. With this former knowledge with other DIY projects this was a good experience and am very please with the results. I recommend thinking out the prep and cleaning the surface well.

  3. I'd use it again 5 Star Review

    Posted by on 8th Jun 2012

    I ordered 2 of these to re-coat an old bathtub. The first batch was too grey instead of off-white. They sent us the other color, which was perfect for my application and they did not charge us!

    I noticed that the spray nozzle can spatter the paint if I allowed build up on the tip, so I learned to wipe the nozzle with a paper towel to prevent build up on the nozzle that could create spots on the tub. Other than that, just realize you have to spray really close to the tub especially when it is a really hot day or the paint turns to dust before hitting the tub. The paint does resist the orange-peel effect like it claims to do, the result are great. I ended up doing some touching up, it turned out great.

    After realizing the instructions says to clear-coat directly after the color and best spray temperature is 76 degrees, i got it down.

    Overall, this is a great product.

    I'd use it again.

Previous | Showing reviews 41-43 of 43

You Recently Viewed...