Refinish Complete Bath, Shower, other Fiberglass and Porcelain Aerosol Spray

Surface Repair Refinishing Spray is ideal for the toughest refinishing jobs, this porcelain hard refinish coating cures and becomes hard like no other paint and is long lasting, durable, with a high gloss finish that is easily kept maintained. Use for refinishing bathtubs, sinks, toilets, shower stalls, stove tops, washers, dryers, refrigerators, outdoor furniture and more. This product can also be used on cast iron, enameled steel, vitreous china, porcelain, gel-coated fiberglass, acrylic and plastics. This ceramic like product is the ultimate for applications where water moister, high humidity and ease of cleaning are a concern. The applications are endless!

Available colors: (Choose above) Appliance White, Plumbing White, Biscuit/Linen and Almond/Bone.

Other applications:
Utility and golf carts, hand rails and grab bars, air conditioning grills, parts refinishing, metal doors and window frames, cabinet doors, office furniture, file cabinets and more. Great for pool, spa, sauna, utility and pump areas, basement, kitchen, yard and other products exposed to the elements.

Application highlights and recommendations:

• Sprays smooth with little orange peel and nice gloss.
• A clear coat is available for surfaces that do not need color or to extend the use of the color coat application.
• Clean the surface first with pre cleaner and wipe with a tack cloth for optimum spray out results and a dust free finish.
• Spraying product at 76 degrees ambient work temperature will give excellent spray out results.
• Don’t spray where a heater or fan is blowing on the spray area. This will dry the coating before it lays to the surface causing roughness to the finish.
• Bonds to acrylic, fiber glass, gel coat and plastics with long term adhesion especially when the surface is sanded first with 320 grit sandpaper or with a scotch brite pad.
• Product is high in solids, will cover generally in two coats. Allow first light coat to become tacky (wait 5 minute) before applying heavier final finish coat.
• Understand shaking the can for a full minute will assure best coverage and results.
• Remove the gloss first from enamel, ceramic and porcelain finishes with our etching cream for best adhesion.
• Mask off the areas that you do not want overspray or product on like the tile edge fixtures and floor.
• Wear the recommended respirator when poor ventilation is apparent.
• Wet coating can be cleaned up with lacquer thinner or Isopropyl alcohol. Be sure to wear protective latex gloves.
• Longevity and adhesion will be extended by allowing the new coating to cure for 48 before putting back into use in a wet or humid environment.

For Technical Information on this product please click here.